Letellier Material Handling Equipment, Inc. serves a variety of Industries.

Wind Energy

Blades

Blades
These blade lifters were designed, manufactured, and delivered by LMHE in 4 weeks. The lifting load capacity is 44,000 lbs for these lifters. Their span is 80 ft. long by 24" and 48" wide. They were designed to ASME B30.20 standards and interface with a 40 ft. ISO freight container handling forklift.

Gear Box
This Gear Box lifter was designed and manufactured at LMHE in 2009. Rated for 25,000 lbs, it offers a hand crank adjustment for precise center of gravity alignment and satisfies ASTM B30.20 and BTH-1 standards.

The features of this Gear Box Lifter include an adjustable lift bail which can traverse along its length when handling gearboxes that have an offset center-of-gravity in relation to the lifting attachment points. The adjustable bail and the series of lower pin locations give this beam the versatility required to lift many sizes and shapes of gearboxes.

Nacelle
The features of this Gear Box Lifter include an adjustable lift bail which can traverse along its length when handling gearboxes that have an offset center-of-gravity in relation to the lifting attachment points. The adjustable bail and the series of lower pin locations give this beam the versatility required to lift many sizes and shapes of gearboxes.

Towers
When lifting Tower Segments in the horizontal position and transporting them from one area to another, these Lift Brackets are a simple but effective solution.

^Back to top

Steel Mill

90,000 lbs. Coil Lifter
Coil Hook with Shackle Fitting
Adjustable Motorized Shackle Lug Spreader Beam
Adjustable Motorized Upper Bail Spreader Beam
Adjustable Pallet Lifter
Aluminum Spreader Beam
Lid Lifter
Motorized Coil Grip with Rotating Bail
Bail Tong with Autolatch
Custom Gear Box Lifter
Cranking Lifter with Rollover Trunnions
Custom Lifter with Coil Grab Lift Point and Stand
D Link
Gear Box Lifter
Hand Crank ID Lifter
Hand Crank Sheet Lifter
Hand Crank Three Leg Gripper
Hand Crank 4-Point Lifter
Hook and Ring Assemblies

^Back to top

Marine Industry

Stainless Steel Web Sling Spreader Beam
Stainless Steel Crane Block
Stainless Steel Swivel Hook with Chain Nest
Special Crane Block with Drip Pan
Hook and Ring Assemblies
Pivoting Fork Boom
Portable Jib Crane

^Back to top

Agricultural

Adjustable Motorized Shackle Lug Beam Spreader
Short Length High Capacity Sling Spreader
Shackle Rail Adjustable Beam
Sister Hook
Special Plate Tong
Tire Lifter
Pivoting Fork Boom
Pallet Lifter
Safety Bolt Anchor Shackle
Safety Chain Shackle
Screw Pin Chain Shackle
Hook and Ring Assemblies
Backhoe Valve Lifting Device

^Back to top

Petroleum Industry

Pipe Tong
Short Length High Capacity Sling Spreader
Hand Crank ID Lifter
Hand Crank Three Leg Gripper
Hand Crank 4-Point Lifter
Lid Lifter
Sister Hook
Special Plate Tong
Rollover Beam
Shackle Rail Adjustable Beam

^Back to top

Food Industry

Stainless Steel Crane Block
Stainless Steel Hook with Chain Nest
Stainless Web Sling Spreader Beam
Special Crane Block with Drip Pan
Hook and Ring Assemblies
Pivoting Fork Boom
Portable Jib Crane

^Back to top

Paper Mill Industry

Motorized Coil Grip with Rotating Bail
90,000 lbs. Coil Lifter
C-Hook
Hand Crank Three Leg Gripper
Coil Hook with Shackle Fitting
Pipe Tong
Shackle Rail Adjustable Beam
Pallet Lifter

^Back to top

Rail Industry

Electric Passenger Car Body Lifter
Used in pairs, this device lifts car bodies. Lower legs swing in and out of position in order to capture the car body. Swing motion can be controlled manually with hand crank or motor driven.

Tank Lifter
LMHE lifting beam specifically designed to lift tank car sections.

Transmission Lifter with Bolt-On Adjustable Counterweight
LMHE Multi-adjustable lifting beam via lower shackle locations. Counterweight is adjustable for tilting and positioning.

Rail Tong
Tong designed to lift rails in the range of 60-140 lbs.

Spreader Beam with Clamps & I-Hooks
Special custom device to lift car frame sections.

C-Frame Lifter with and without Crank Adjustment
LMHE C-Frame lifter with adjusting forks to grip & lift "Intercooler Units". Once the units are lifted, they can be positioned inside a closed cavity with the C-Frame avoiding all obstructions.

Insulated Swivel Hook
Designed for welding applications where the assemblies hang from a hoist. The insulated hook protects the hoist from welding machine electrical currents.

Offset Extension Arm
An example of the many custom design attachments developed by LMHE, this arm extends from a lifting device and is specific to the lift application.

Hydraulic Pump Lifter
Gravity activated grip and lock
Pneumatic Gripper
LMHE gripper was designed for lifting engines. Air activated jaws with bearing assisted trunnions for manual rotation. Gripper jaws can be adjusted to balance the engine along rotational axis.

^Back to top